|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DF005S THRU DF10S Reverse Voltage - 50 to 1000 Volts GLASS PASSIVATED BRIDGE RECTIFIERS Forward Current - 1.0 Ampere FEATURES DF-S .047(1.2) .037(0.95) .335(8.5) .307(7.8) .031(0.8) .023(0.6) .256(6.5) .244(6.2) .406(10.3) .391(10.0) .140(0.35) .008(0.2) .323(8.2) .315(8.0) .063(1.6) .055(1.4) .205(5.2) .197(5.0) .134 (3.4) .094 (2.4) Plastic package used has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junction High surge overload rating of 50 Amperes peak High temperature soldering guaranteed: 260C/10 seconds, at 5 lbs. (2.3kg) tension MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750 Method 2026 Mounting Position: Any Weight: 0.014 oz., 0.4 g 1 2 3 4 Dim ensions in inches and (m illim eters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. CHARACTERISTICS SYMBOL V RRM VRMS VDC o DF005S 50 35 50 DF01S 100 70 100 DF02S 200 140 200 DF04S 400 280 400 1.0 50 1.1 10.0 500 10 25 40 DF06S 600 420 600 DF08S 800 560 800 DF10S 1000 700 1000 UNITS V V V A A V A Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 40 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum DC Forward Voltage Drop per Bridge Element at 1.0A DC Maximum Reverse Current at rated DC Blocking Voltage per element I 2t Rating for Fusing (t<8.3ms) Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range NOTES : 1. Measured at 1 MHZ and applied reverse voltage of 4.0 volts @T A = 25 C @T A = 125 C o o IO I FSM VF IR I2t CJ R J A T J, T STG A 2 Sec pF 0 C/W C -55 to + 150 0 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads. DF005S THRU DF10S RATINGS AND CHARACTERISTIC CURVES Fig. 1 - Derating Curve Output Rectified Current 60 HZ Resistive or Inductive Load Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Leg Average Forward Output Current (A) 60 50 40 30 20 10 0 Average Forward Output Current (A) 1.0 TJ = 150C Single Sine-Wave (JEDEC Method) 0.5 P.C.B mounted on 0.51 x 0.51" (13 x 13mm) Copper pads with 0.06" (1.5mm) lead length 0 20 40 60 80 100 120 140 150 1.0 Cycle 1 10 100 Ambient Temperature (C) Number of Cycles at 60 Hz Instantaneous Reverse Current (A) 10 Fig. 3 - Typical Forward Characteristics Per Leg 100 Fig. 4 - Typical Reverse Leakage Characteristics Per Leg Instantaneous Forward Current (A) 1 10 TJ = 125C 1 0.1 TJ = 25C Pulse width = 300s 1% Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 0.1 TJ = 25C 0.01 0 20 40 60 80 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (V) Junction Capacitance (pF) TJ = 25 C f = 1.0MHz Vsig = 50mVp-p Transient Thermal Impedance ( C/W) 100 Fig. 5 - Typical Junction Capacitance Per Leg 100 Fig. 6 - Typical Transient Thermal Impedance 10 10 1 1 0.1 1 10 100 0.01 0.1 1 10 100 Reverse Voltage (V) t, Heating Time (sec.) |
Price & Availability of DF08S |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |